CAFFEWERKS Silicone La Marzocco Group Gasket (6.0mm)

• Description
• Specs
• Method

• SILICONE SEALS BETTER

  Replace that leaky gasket in the group head of your La Marzocco, Slayer or Mavam espresso machine with this neutral and aroma-free 6.0mm silicone gasket from Caffewerks. The soft consistency creates a better seal and makes installation even easier.

  Designated a 6.0mm. Measures at 6.3mm finished. Portafilter lands at 6 o'clock on newer gear. This gasket is measured at two points; where the portafilter basket lands (6.0mm) and the overall measurement (8.0mm) is the cone that sits inside the basket as an additional seal.

• • 6.0mm conical design and external grooves match standard group head gaskets
  • Heat resistant silicone
  • Forms tight seal without tightening the portafilter as much as a standard gasket
  • 72mm (OD) x 55mm (ID) x 6.35mm (thickness) Red Silicone Gasket
  • Petroleum based grease can degrade silicone. Use a silicone lubricant instead, ideally a food safe white grease.
  • Use the portafilter with the basket removed to install the gasket to avoid breakage
  • Compatibility: La Marzocco, Slayer, Mavam

• Use to replace the old gasket on your compatible espresso machine.

  Please note that although the gaskets are strong under compression, you should never use a sharp tool like a screwdriver to install them. This may tear the silicone.

caflatte belman bellmann bell man ballman expresso moka bialetti percolator grosche pylano duna bodum chambord alessi paper filter filter handle gasket